Sincrotrasmettitori

DIGITAL MACRO RING FLASH

Flash for taking macro shot with digital SLR camera.
Each exposutre data set is obtained from exposure table.

In addition, capacity controller has 3 switch positions of full, 1/2 and
1/4, decreases light power and widens the aperture value by one f-
stop and two f-stops each at the same distance and the same ISO.
For example
first switch to fill-position at 10cm, f32, ISO 100
then switch to 1/2-position, the result is 10cm, f22, ISO 100
then switch to 1/4-position, the result is 10cm, f16, ISO 100
The smaller the f-number becomes, the shallower the depth of field gets.

Ring flash is equipped with 55mm screw-in size and is attached to lens
front directly or through stepping ring,
Power pack is put onto camera’s hot-shoe.
GN: 3.2, ISO 100, meter
Power source: 2 AA batteries

ISO 100
cm 10 20 30 40 50 60 70 80 90 100
 f-stop  32  16  11  8  5.6+1/3  5.6  4+1/3  4.0  2.8+2/3  2.8+1/3


STUDIO FLASH TRANSMITTER

Remote controller for studio flashes.
Synchro cords become unnecessary.

Shoots infra-red invisible ray by synchronizing with camera’s shutter
pressing,
Studio flash’s photocell or sensor catches the ray.
Simultaneously studio flashes illuminate.

Effective distance: about 45 meters in straight distance in daylight
Automatic powering-off circuit within about 5 minutes
Recycling time: 0.1~1.0 second
Put on camera’s hot shoe,
Power source: 2 AA alkaline batteries

When the camera has not a hot-shoe, synchro cord is connected to
this transmitter and to the camera’s x terminal..

MACRO TWIN FLASH
FOR DIGITAL CAMERA

For macro shot use
fits every digital camera with hot-shoe or with synchro terminal
guide number 3.2 (ISO 100, meter)
volume controller with f2.0, f2.0 & f4.0 positions to control flash
power
put into camera’s accessory shoe
built-in twin flash heads, twin flexible arms & hot-shoe
power source 2 AA alkaline batteries

MACRO TWIN FLASH
FOR FILM CAMERA

Flash for macro shot with 35mm SLR film camera,
GN 3.2, meter, ISO 100
Exposure combination data can be obtained from this flash.
For example,
10cm/f32,
20cm/f22,
30cm/f16, etc.
This flash is equipped with built-in twin flexible arms, twin flash
heads, hot-shoe and synchro socket.
This flash is directly mounted on camera’s hot-shoe.
If the camera has not hot-shoe, use synchro cord between this
flash and the camera.
Power source 2 AA alkaline or equivalent batteries